A FLOW "TWIN FLAME" YUKIHIKO KIYAMA MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 43.0mm
Maximum Diameter : 7.3mm
Weight : 16.5g each
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ D-evolution Logo
THE FIRST DELIVERY-
The deep doubling cut on the rear allows for a tight grip and allows the momentum from the take back to the release to be perfectly transferred over to the barrel.
Weight is placed slightly in the front.

A FLOW "GLADIATOR" HIROKAZU OSAKI MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 39.0mm
Maximum Diameter : 7.8mm
Weight : 16.5g each
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ D-evolution Logo
THE SECOND DELIVERY-
The change in the slits from the rear to center allows a stronger and stable grip.
In addition, the tapering that starts from a maximum diameter of 7.8mm allows for a confident grip.
The main characteristic of this barrel is that it is Front Loaded.
By doing this, it is made possible to achieve a clear cut throw with an aggressive flight and a perfectly straight trajectory.

A FLOW "mine" MAYUMI OUCHI MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 44.0mm
Maximum Diameter : 6.7mm
Weight : 18.0g each
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ D-evolution Logo
THE THIRD DELIVERY-
This barrel features tiny shark cuts to avoid the feeling of the fingers deeply entering the cuts.
By doing this, it is possible to control the throws velocity and power and to accurately feel the actual weight of the barrel.
The timing to release the dart is also made easier to control and it is therefore easier to throw exactly the way you would expect to.
With a straight barrel, it is usually hard to accurately select the same grip position but, by adding a ring cut within the shark cut,
Dynasty has made it possible to do so.
The weight is centered in the middle.

A FLOW "TWIN FLAME α" model Kiyama Yukihiko

Specifications:
Material : Tungsten 95%
Length (barrel only) : 43.0mm
Maximum Diameter : 7.5mm
Weight : 16.5g each
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ D-evolution Logo
Top-level grip, flight and stability.
The maximum diameter of the barrel is 0.2mm thicker than the original Twin Flame, with the angle to the rear of the barrel section designed in two stages, assisting in a strong release. TWIN FLAME α adopts a new W-cut to increase grip and reduce irregularities.
Although at a longer than average length of 43.0mm, regardless of the size of the hand, the grip is easier to form and more stable than before.
Within the A-FLOW line, this dart came out among the top in regards to grip, flight and stability.

GLADIATOR´【DASH】Osaki Hirokazu MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 39.0mm
Maximum Diameter : 7.8mm
Weight : 17.0g each barrel only
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ A-FLOW Logo
The Gladiator Dash was designed with tough combats in mind.
The design, finish and throw is made sharper than the previous version by adjusting the curve between the very front to the wing cuts.
The throwing precision is improved by making the following changes: The ring cuts towards the rear are replaced with V cuts which eliminates the uncomfortable sharpness, and the very end has a different taper and is designed with micro cuts which balances the grip.
This design combines the aggressiveness and straight throwing capability of the previous GLADIATOR design and the improved throwing precision of this new version.

A FLOW "THE EAGLE" LARRY BUTLER MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 51.0mm
Maximum Diameter : 6.2mm
Weight : 18.0g each (Barrel only)
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ A-Flow Logo
A rare, long barrel
With its 51mm in length, it is very long and straight. The main cuts are comprised of wing cut only which makes this barrel very simple in shape.
Because the design is so simple, players don't have to adjust their throw or their grip to the barrel so it is very easy to use.
The overall balance is excellent and players can hold the dart anywhere on the main cuts and have a confident and comfortable grip.
It is a front loaded barrel.

A FLOW "Johnny K" John Kuczynski MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 44.5mm
Maximum Diameter : 7.2mm
Weight : 16.5g (Barrel only)
Package Content
Shaft : LARO SILENT 260
Tip : LIPPOINT
Flight : Dee.flight w/ A-FLOW Logo
John Kuczynski's Signature Barrel employs a "wing cut" ring in the rear,
which utilizes the power of the arm swing to generate force.
The rear pocket is designed to securely transmit the force from the arm to the dart.
This allows you to aim for the target in a straight line.
Upon extending your arm, the dart jumps directly towards the target.
Through his innovative design, Johnny K was able to accomplish his goal of creating a barrel that performs exactly as expected.
Front loaded

A-FLOW BLACK LINE"JUJAK"PARK HYUNCHUL MODEL

Specifications:
Standard Version
Material: Tungsten 95%
Length (barrel only): 45mm
Maximum Diameter: 7.0mm
Weight: 18.0g each

Professional Version
Material: Tungsten 95%
Length (barrel only): 45mm
Maximum Diameter: 7.0mm
Weight: 18.0g each
Package Content
Shaft: Laro Silent 260
Tip: Lippoint
Flight: Dee.flight w/ A-FLOW Logo
Subtelty and Power define the JUJAK
A Lotus Cut is used for the main cuts in order to achieve a "Beautiful yet Powerful throw".
The characteristic of this kind of cut resides in its fine yet strong grip it provides which maximizes the information transferred to the tips of the fingers thus allowing for a perfectly stable throw.
Very steeply angled shark cuts combined with an ultimate radius allows for players who hold their darts at the very rear of this long 45mm barrel to take advantage of the main characteristic of the JUJAK: a "Beautiful yer Poweful throw".
2 weights were created for this barrel: an 18g Standard Version and a 21g Professional Version.
The Professional 21g version is designed to utlize to the maximum, the advantages of a heavy dart.
The Center of gravity is the same for both versions and is very slightly in the front.

A-FLOW BLACK LINE"BIG DOG"RANDY VAN DEURSEN MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 48.0mm
Maximum Diameter : 6.8mm
Weight : 18.0g each (barrel only)
Package Content:
Shaft : L-SHaft Slim Lock
Tip : LIP POINT
Flight : Dee.flight with A-Flow Logo
Accessory : SHELL LOCK Rings
This model focused on the selection of the various depth, width and type of cuts.

By designing evenly spaced double ring cuts, that are perfect in depth and width, in the mid-section of the dart,
it allows even for the players with a soft grip to maximize their strength relayed to the dart.
Also, by bringing the cuts all the way to the front, it allows players who prefer holding their darts at the front to be comfortable as well and have a stable throw.

Although it is a longer barrel, it has a simple outline that allows a wide variety of players to make use of its characteristics.

* The flights come pre-punched to allow usage of the Shell Lock rings

A-FLOW BLACK LINE"any"HIYAMA ASAKO MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 44.0mm
Maximum Diameter : 7.3mm
Weight : 18.0g each (barrel only)
Package Content:
Shaft : L-SHaft Slim Lock
Tip : LIP POINT
Flight : Dee.flight with A-Flow Logo
Accessory : SHELL LOCK Rings
By having the center of gravity in the center of the dart, the weight of the dart can be appreciated by the players who hold their darts towards the back.

This dart has been refined to optimize the balance between its gripping power and the ease of throw.
With the cuts and the taper at the back end, this dart avoids any dropped throw and allows for a remarkably straight trajectory.

* The flights come pre-punched to allow usage of the Shell Lock rings

A-FLOW BLACK LINE"TWINFLAME BOOST"KIYAMA MODEL

Specifications:
Material : Tungsten 95%
Length (barrel only) : 43.0mm
Maximum Diameter : 7.3mm
Weight : 16.5g each (barrel only)
Package Content:
Shaft : LARO SILENT 260
Tip : LIP POINT
Flight : Dee.flight w/ D-evolution Logo
A few details were changed from the previous Twin Flame α.
The main cuts are a combination of shark cuts, ring cuts and reverse shark cuts and it efficiently transfers the power of the arm swing into the barrel.
Micro shark cuts are designed at the tail of the dart which is the last point of contact with the finger before the dart leaves the hand. This allows optimal control of the dart which is the main feature of this dart.
The front is squeezed out and has a couple steps to fit well with the fingers. It makes it easier to have a more precise grouping and to picture the dart flowing through the air toward the target.
Starting from the rear ring cuts, there is a taper which adds comfort in the grip and prevents power loss and maximizes control.
The center of gravity is near the middle, slightly to the front.

A FLOW BLACK LINE "THE EAGLEⅡ" LARRY BUTLER MODEL

Specifications:
Material: Tungsten 95%
Length (barrel only): 55.0mm
Maximum Diameter: 6.5mm
Weight: 21.0g (barrel only)
Package Content
Shaft: LARO
Tip: LI P POINT
Flight: Dee.flight w/ A-FLOW Logo
The longest barrel of A-FLOW.
The length and the weight of being one of a kind, so it shows amazing performance.
The throw is straight line trajectory, the dart gets top speed just after the release, It boasts excellent stability by the length and the from.
The simple cut is adjusted many times over, it compatible with various grip. The barrel is completed to hold water.

A FLOW BLACK LINE"THE CORSAIR"CYRIL BLOT MODEL

Specifications:
Material: Tungsten 95%
Length (barrel only): 42.0mm
Maximum Diameter: 7.0mm
Weight: 18.0g (barrel only)
Package Content
Shaft: LARO
Tip: LI P POINT
Flight: Dee.flight w/ A-FLOW Logo
The cut is not too hooked and easy to fit fingertips. It is set up based on elaborate calculation.
Leaving from hand is outstanding, compatible with a little heavy weight setting.
The control performance is a top-class of A-FLOW.

A-FLOW BLACK LINE"GLADIATOR2"Osaki Hirokazu MODEL

Specifications
Material : Tungsten 95%
Length (barrel only) : 37.0mm
Maximum Diameter : 7.4mm
Weight : 17.0g (barrel only)
Package Content
Shaft: LARO
Tip: LI P POINT
Flight: Dee.flight w/ A-FLOW Logo
It is used wing-cut as main for representative of GLADIATOR series.

A-FLOW BLACK LINE"WAVE RIDER" MAYUMI OUCHI MODEL

Specifications
Material : Tungsten 95%
Length (barrel only) : 43.0mm
Maximum Diameter : 6.8mm
Weight : 20.0g (barrel only)
Package Content
Shaft: LARO
Tip: LI P POINT
Flight: Dee.flight w/ A-FLOW Logo
It is used delicate cut one above the other like rippling waves
W-WAVE cut of the center helps more stable for grip.

【A-FLOW BLACK LINE "any more"HIYAMA ASAKO MODEL】

Specifications
Material : Tungsten 95%
Length (barrel only) : 48.0mm
Maximum Diameter : 7.0mm
Weight : 19.0g (barrel only)
Package Content
Shaft : LARO
Tip : LIP POINT
Flight : Dee.flight w/ A-FLOW Logo
slim,stylish and it's possible to aim more accurately; anymore
ripple cut and wide ring cut as main.

【A-FLOW BLACK LINE "JUJAKⅡ"Park Hyunchul Model】

Specifications
Material : Tungsten 95%
Length (barrel only) : 45.0mm
Maximum Diameter : 7.2mm
Weight : 19.0g (barrel only)
Package Content
Shaft : LARO
Tip : LIP POINT
Flight : Dee.flight w/ A-FLOW Logo
-Bold yet subtle-
It combines wing cut and R ring cut as main

【A-FLOW BLACK LINE "BABE" KONNO AKIHO MODEL】

Specifications
Material : Tungsten 95%
Length (barrel only) : 36.0mm
Maximum Diameter : 8.2mm
Weight : 17.2g (barrel only)
Package Content
Shaft : LARO
Tip : LIP POINT
Flight : Dee.flight w/ A-FLOW Logo
-best of cute barrel-
shell shape barrel with ultrathin cut

【A-FLOW BLACK LINE "RIELL" SHIMIZU MAYU MODEL】

Specifications
Material : Tungsten 90%
Length (barrel only) : 39.0mm
Maximum Diameter : 7.4mm
Weight : 17.5g (barrel only)
Package Content
Shaft : LARO
Tip : LIP POINT
Flight : Dee.flight w/ A-FLOW Logo
crow cut at the front is the one of main feature
It combines wing cut and shark cut as main