Specifications:
■Material: Tungsten 95%
■Length (barrel only): 41mm
■Maximum Diameter: 7.3mm
■Weight: 16.5g each

Package Content:
■Shaft：LARO SILENT 260
■Tip: LIPPOINT
■Flight：Dee.flight with D-evolution Logo

A-FLOW PLATINUM LINE "GLANCE"

Kiyama Yukihiko Produce Model

Players who hold their darts towards the back end will love the fact there is no cuts along the back end of the dart.

Also the cuts at the center are designed to be near the center of gravity and will allow players to have a confident grip yet easy to release.

The particularity of this dart is that they allow for a comfortable grip at various holding position.
The center of gravity is located right in the middle of the dart.

Specifications:
■Material: Tungsten 95%
■Length (barrel only): 41mm
■Maximum Diameter: 7.4mm
■Weight: 16.5g each (Barrel only)

Package Content:
■Shaft：LARO SILENT 260
■Tip: LIPPOINT
■Flight：Dee.flight with D-evolution Logo

A-FLOW PLATINUM LINE "MOMENT"

Kiyama Yukihiko Produce Model

"This design allows for a perfect balance of sharp and exhilarating throw with a stable speed."

By using shark cuts as the main cuts and having the cuts spaced widely, it is possible to hold the dart lightly yet get a strong grip and throw with a stable feeling.

Experience this perfectly balanced dart allowing for an exhilarating and sharp throw.
The center of gravity is very slightly to the front.

Specifications:
■Material: Tungsten 95%
■Length (barrel only): 40mm
■Maximum Diameter: 7.6mm
■Weight: 16.5g each (Barrel only)

Package Content:
■Shaft：LARO SILENT 260
■Tip: LIPPOINT
■Flight：Dee.flight with A-Flow Logo

A-FLOW PLATINUM LINE "BURNING"

Osaki Hirokazu Produce Model

"This is a high-end model that allows for both a throw that cuts the air and a perfectly stable grip"

This model is similar to the GLADIATOR but approached from a different perspective.

The maximum diameter area has been pushed all the way to the back and a depression is formed at the back to make it easier for a grip towards the back end of the barrel.

Wing cuts are used as the main cuts and micro cuts in the depressed area allows for an amazing feel at the tip of the fingers and for a perfect grip.

This model is especially recommended for those who do not have a confident or comfortable grip or for those who seek less slippery surfaces.

The center of gravity is set slightly in the front.

Specifications:
■Material: Tungsten 95%
■Length (barrel only): 35mm
■Maximum Diameter: 8.2mm
■Weight: 16.5g each (Barrel only)

Package Content:
■Shaft：LARO SILENT 260
■Tip: LIPPOINT
■Flight：Dee.flight with A-Flow Logo

A-FLOW PLATINUM LINE "CANNON"

Osaki Hirokazu Produce Model

"A comfortable weight sensation"

In order to maximize the feeling of a stable grip, this barrel uses a mix of simple wide-ring cuts and smaller cuts.
Especially recommended for those wanting to feel the weight of the dart, to feel just like when throwing a ball.

The center of gravity is towards the front.

Specifications:
■Material: Tungsten 95%
■Length: 44.0mm
■Maximum Diameter: 7.0mm
■Weight: 17.0g each.

Package Content:
■Shaft: LARO SILENT 260
■Tip: LIP POINT
■Flight: Dee.flight "MYM" Standard

A-FLOW PLATINUM LINE "COMET"

Ouchi Mayumi Produce Model

"The pursuit of controllability with the insistence on shape"

The shape of the barrel allows the user to unconsciously grip the barrel comfortably with an excellent fit.
The cuts along the curve of the grip maximize the stability and power of the throw.

With small and complex ring cuts and shark cuts, we fine-tuned the surface stress of the grip to allow for a perfect trajectory upon the moment of release.

Center of gravity is set to the center.

Specifications:
■Material: Tungsten 95%
■Length: 38.0mm
■Maximum Diameter: 7.6mm
■Weight: 17.0g each

Package Content:
■Shaft: LARO SILENT 260
■Tip: LIP POINT
■Flight: Dee.flight "MYM" Standard

A-FLOW PLATINUM LINE "MOEWE"

Ouchi Mayumi Produce Model

"The Pursuit of the push"

The rear taper angle is comprised of three stages, allowing the thrower to press firmly on the barrel. MOEWE is designed for the player to push the barrel with improved performance, achieving ideal power and trajectory.

The rear rings taper inward in both directions, providing an easy anchor position that is clearly supported, which helps drive the front-loaded barrel forward.